Razer Blade Pro 17 Disassembly
|In this guide, I’ll disassemble Razer Blade Pro, I will remove the bottom case, SSD, battery, wireless card, heat sink, cooling fan and motherboard. Refer to this guide, you can upgrade and repair your Razer Blade Pro.
There are fourteen screws securing the bottom case.
Remove all screws from the bottom case.
Pry up and remove the bottom case.
Now, you can get access internal components, including hard drive, battery, USB board and cooling fan.
Razer Blade Pro uses a lot of black tape fixed cable. It is not very professional.
Disconnect the battery connector from the motherboard.
Pry up and remove the battery.
Razer Blade Pro comes with a 14.8v, 5000mah, 74wh li-ion battery.
Remove the black tape covered the SSD.
Disconnect two cables connecting to the USB board
Unplug two wireless antenna cables.
Remove the screw securing the wireless card.
Hi Chris,
Do you know who is selling the battery replacements for Razer Blade Pro? It looks like Simplo Technology Inc. is the manufacturer of the battery for this laptop but it seems they are only selling huge quantities of batteries for companies. Most likely they will not sell a single battery to a private individual. I live in Europe, where Razer Blade laptops are not being sold. Razer is not selling battery replacements either. In order to get a new battery I would have to send my laptop to U.S. for servicing which is expensive and inconvenient. I want to buy a new battery and replace it myself.
i think there is no replacement battery for razer blade pro. you should buy it from Razer
I see. They will not sell a battery separately.
https://insider.razerzone.com/index.php?threads/replacement-battery.5482/
They call a battery replacement a “repair”.
the best way is open your battery, remove the old cells and replace it by new cells
This is a good idea. I might try it when my battery life deteriorates even more, so I will have nothing to lose even if I damage the already useless battery. Thanks Chris.
Do you know where can I buy the buy ? Or do you know the diemnsion of it ? Thanks
Battery
I’m not sure if anyone is monitoring this anymore, but here’s hoping. How do you install an additional ssd in this laptop? When I had it open I saw the cavity beside the battery where a drive would fit, but I didn’t see any connectors.
Could you please tell me the part number for LVDS1 the screen connection?
I would also like to the LVDS1 motherboard lcd connection part number. Please, I’ve been working on trying to figure it out for weeks.
Hey, Chris I have an issue with my battery but I was wondering what screwdriver did you use because I looked at my back cover and I didnt see anything that any tool could grab to loosen it.