Home | Register | Log In
Your cart is empty
Lenovo 00JT268  Cooling Fan

Click on above image to view full picture

CPU Cooling Fan For Lenovo 00JT268

Write a review

Ask a question



CPU Cooling Fan For Lenovo 00JT268

  • Input: DC5V
  • Output:
  • Condition: Brand New, 100% working
  • Warranty: 12 months
  • Availability: In Stock!
  • Installation Guide: Visit our repair blog to learn how to remove and install the cooling fan on Lenovo 00JT268
  • Quality: This product is direct from the manufacturer, passed strict QA/QC and retested before ship out.
  • Guarantee: 30-day money back and full one year warranty.
  • Replacement: During the time of warranty, your item happens to be with some problems, don't worry. Please contact us for replacement.
  • Satisfaction: I don't know if I can satisfy every customer, but I will try my best.

  • Our business is built on honesty, integrity and trust. We only deliver you the highest quality replacement laptop parts. Our customer support is here to assist you before and after the sale. If you have any questions regarding compatibility or other issues, please don't hesitate to contact us.
    Related Parts Number and Laptops
    Removal and Installation Guide

    How to remove and replace cooling fan on Lenovo 00JT268

    Step 1. Remove one screw securing the service cover on the bottom.
    Step 2. When the service cover removed, you can get access to the hard drive and both RAM modules.
    Step 3. Remove three screws securing the palm rest assembly.
    Step 4. Lift up the palm rest assembly as it shown on the following picture and carefully turn upside down. Be careful. It's still connected to the motherboard.
    Step 5. Before you can remove the palm rest completely, it's necessary to unlock and release the touchpad cable.
    Step 6. Lift up the right side of the cable retainer with the fingernail. The retainer will open up at a 90-degree angle. Now you can pull the cable out of the connector and remove the palm rest.
    Step 7. Remove screws from the bottom of the Lenovo 00JT268. Remove three screws securing the keyboard assembly.
    Step 8. Disconnect two keyboard cables from the motherboard. The left connector can be unlocked the same way as we did in step 6.
    Step 9. Slide the cable retainer about 2-3 millimeters to the shown direction. The retainer must remain connected to the connector base.
    Step 10. Now remove the tape securing the connection and pull the cable from the connector. Lift up the keyboard assembly and remove it from the Lenovo 00JT268.
    Step 11. Remove the mylar cover between the fan and heat sink. Disconnect the fan cable.
    Step 12. Remove four screws securing the fan assembly. Lift up and remove the fan of Lenovo 00JT268. Now you can replace the failed fan with a new one.

    Ask a question about the 00JT268