Lenovo Yoga 13 Disassembly

In this guide, I’ll disassemble Lenovo Yoga 13, I will remove and replace the battery, SSD, keyboard, RAM, palm rest, wireless card, speakers, heat sink, cooling fan and motherboard. Refer to this guide, you can upgrade and repair your Lenovo Yoga 13.

Remove ten screws from the bottom case.

Turn over the laptop. Pry up the keyboard with a pry bar.

Lift up the keyboard, unlock and pull out the keyboard cable.

Lenovo Yoga 13 keyboard

Disconnect the touchpad cable from the motherboard.

Disconnect indicator module cable.

Remove all screws securing the palm rest.

Pry up the palm rest with a guitar pick.

Lenovo Yoga 13 palm rest has been removed.

Under the palm rest, you can get access to the battery, SSD, wireless card, RAM, speakers, heat sink and cooling fan.
Lenovo Yoga 13 also have a spare mSATA slot, you can install new SSD.

Remove four screws securing the battery.

Disconnect the battery connector from the motherboard.

Lenovo Yoga 13 comes with a 14.8v, 54wh Li-polymer battery, Lenovo part number: L10M4P12.

Remove one screw securing the SSD and take it away from its slot.

Lenovo Yoga 13 features a 128GB Samsung SSD, Lenovo part number: 45N8174, 45N8175.

Disconnect the cable and remove two screws. You can remove the gravity sensor switch module.

Here is gravity sensor switch module.

The board integrated a RJ45 port, a card reader and a CMOS battery.

Remove the RAM. Lenovo Yoga 13 only have one memory slot.

Here is Lenovo Yoga 13 motherboard.

Lenovo Yoga 13 cooling fan

Lenovo Yoga 13 dc power jack

Speaker module

Disconnect the black cable.
Remove the metal shield, you can see the wireless card.

Lenovo Yoga 13 wireless card


Via zol.com.cn

Add a Comment

Your email address will not be published. Required fields are marked *