HP ZBook 15u G2 Disassembly (SSD, RAM, HDD Upgrade Guide)

In this guide, I’ll disassemble HP ZBook 15u G2 to remove service cover, SSD, RAM, battery, wireless card, cooling fan and motherboard. Refer to this guide, you can upgrade, repair your HP ZBook 15u G2.

There is no screw securing the service cover, so access the internal component is pretty simple, just need to unlock the lock catch.

Unlock the latch.

The service cover was removed.

Now you can access the RAM, SSD, wireless card, battery, heat sink and cooling fan, on the bottom left corner is a spare hard drive slot, so the user can add another hard drive.

The HP ZBook 15u G2 comes with two 8GB RAM. The RAM type is DDR3L 1600 MHz SDRAM.

Sandisk PCIe 256GB SSD, HP part number is 803380-001.

Intel Dual Band Wireless-AC 7265 wireless card, HP part number is 756749-001. It is support for 802.11ac, 2 x 2 Wi-Fi and Bluetooth 4.0.

Unlock and remove the battery.

Under the battery, you can find a SIM slot.

The HP ZBook 15u G2 comes with a 3 cells, 50WH li-ion battery.

SATA-III Docking Station Port

One Comment

Leave a Reply to fabio Cancel reply

Your email address will not be published. Required fields are marked *