Asus UX303LN Disassembly
|In this guide, I’ll disassemble Asus UX303LN, refer to this guide, you can upgrade, repair and clean your Asus UX303LN, or remove and replace the back cover, battery, RAM, SSD, wireless card, heat sink and cooling fan.
After the bottom case was removed, you can see the internal components, including the battery, wireless card, RAM, SSD, heat sink and cooling fan.
Asus UX303LN only has one RAM slot. It is comes with a 2.5″ Sandisk 256GB SSD.
The Asus UX303LN has a spare mSATA slot for user install new SSD.
5 Comments
Can anyone answer this question?
Can you install the OS in the spare mSata (half size)?
I intend to have OS in the mSata and use the hdd or SSD for storage only.
Is that possible?
Thanks
I answer myself. Yes you can. At least in the similar 303lb.
Nowhere do you describe the actual disassembly, which requires removing the two rubber pads nearest the display hinge. I hope others finding this page are helped by knowing this.
Thanks Joe, for noticing this, even though I had indeed found that out already. But I am stuck now at the next phase: after unscrewing the screws, the hinge seems to require some additional action to actually dismount. I just cannot figure out what, and I prefer not to try too hard and break the back lid in two 😉 Would you be able to describe how I can remove the lid after all screws are out? Thanks a million!
Check out this link for more info
https://www.youtube.com/watch?v=_jaaBXkr6OY